[Firmware 更新]をクリックします。

[Select Firmware] より、パソコン上のファームウェアのイメージファイルを選択します。
イメージファイルの選択後 [UPLOAD] をクリックします。

[Uploaded] が [100%] の表示になったら [UPDATE] をクリックします。

[Update Progress]に
* updating default firmware area: [領域番号]¹⁾
Succeeded.
と表示されたら更新完了です。

●実行例

### MA-S1xx series firmware update utility (for 2-area firmware).
* checking firmware file integrity... OK.
* custom firmup-pre script found.
* AT91Bootstrap file found.
  writing "at91bootstrap.bin" image to /dev/mtd0 ... succeeded.
MSP430 needs to be programmed.
MSP430 firmware updater
* Load firmware from file: /tmp/.firmware/msp430firm.txt ...done.
* Invoke MSP430 BSL...done.
* Wait for BSL booting...done.
* Mass-erase device...done.
* Unlock device succeeded.
* Writing segment No. 1  OK.
* Writing segment No. 2  OK.
* Writing segment No. 3  OK.
* Writing segment No. 4  OK.
* Writing segment No. 5  OK.
* Writing segment No. 6  OK.
* Verify segment No. 1 ... OK.
* Verify segment No. 2 ... OK.
* Verify segment No. 3 ... OK.
* Verify segment No. 4 ... OK.
* Verify segment No. 5 ... OK.
* Verify segment No. 6 ... OK.
Updating Area: 1 ...
* image file for kernel found, writing... succeeded.
* image file for kmod found, writing... succeeded.
* image file for initramfs found, writing... succeeded.
* image file for rootfs found, writing... succeeded.
* DTB file(s) found.
  writing at91-centurysys-gemini-00.dtb... succeeded.
  writing at91-centurysys-gemini-01.dtb... succeeded.
  writing at91-centurysys-gemini-01.dtbo... succeeded.
  writing at91-centurysys-gemini-02.dtb... succeeded.
  writing at91-centurysys-gemini-02.dtbo... succeeded.
  writing at91-centurysys-gemini-03.dtb... succeeded.
  writing at91-centurysys-gemini-03.dtbo... succeeded.
* Bootloader file found.
  writing "barebox.bin" image to /dev/mtd2 ... succeeded.
  erasing bootloader environments (/dev/mtd1)... done.
* updating default firmware area: 1
Succeeded.

画面右上の [Shutdown/Reboot] をクリックします。

下記ウィンドウが表示されたら、[REBOOT] をクリックすると、本装置の再起動を開始します。

[機器情報] - [一般情報] よりファームウェアのバージョンが確認出来ます。