mae3xx_tips:setup_tshark:start
tshark の導入
apt-get を使ったインストール
tshark を使いたいだけであれば、お手軽な apt-get がお奨めです。
root@plum:/usr/local/src# apt-get update root@plum:/usr/local/src# apt-get install -y tshark root@plum:/usr/local/src# thsark -v
TShark 1.10.6 (v1.10.6 from master-1.10) がインストールされたことがわかります。
ソースコードからのインストール
ただ apt-get だけでは対応できない場合 (PPA が存在しない場合やどうしても最新版を使いたい場合など) ソースコードを自力でコンパイルしてインストール必要があります。 そこで、その方法を tshark を例にやってみましょう。
まずは、最新の tshark を落としてきて展開します。
root@plum:/usr/local/src# wget https://1.as.dl.wireshark.org/src/wireshark-1.10.8.tar.bz2 root@plum:/usr/local/src# tar jxf wireshark-1.10.8.tar.bz2 root@plum:/usr/local/src# cd wireshark-1.10.8/
次に configure のオプションを選択します。 とりあえず、ヘルプをみてそれっぽいものを探しましょう。
root@plum:/usr/local/src/wireshark-1.10.8# ./configure --help
必要そうなのはこの辺。
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-static[=PKGS] build static libraries [default=no]
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-osx-deploy-target
choose an OS X deployment target [default=major
release on which you're building]
--disable-largefile omit support for large files
--enable-extra-gcc-checks
do additional -W checks in GCC [default=no]
--enable-warnings-as-errors
treat warnings as errors (only for GCC or clang)
[default=no]
--enable-silent-rules less verbose build output (undo: `make V=1')
--disable-silent-rules verbose build output (undo: `make V=0')
--enable-usr-local look for headers and libs in /usr/local tree
[default=yes]
--enable-wireshark build GTK+-based Wireshark [default=yes, if GTK+
available]
--enable-packet-editor add support for packet editor in Wireshark
[default=no]
--enable-profile-build build profile-ready binaries [default=no]
--disable-gtktest do not try to compile and run a test GTK+ program
--disable-glibtest do not try to compile and run a test GLIB program
--enable-tshark build TShark [default=yes]
--enable-editcap build editcap [default=yes]
--enable-capinfos build capinfos [default=yes]
--enable-mergecap build mergecap [default=yes]
--enable-reordercap build reordercap [default=yes]
--enable-text2pcap build text2pcap [default=yes]
--enable-dftest build dftest [default=yes]
--enable-randpkt build randpkt [default=yes]
--enable-airpcap use AirPcap in Wireshark [default=yes]
--enable-dumpcap build dumpcap [default=yes]
--enable-rawshark build rawshark [default=yes]
--enable-pcap-ng-default
use the pcap-ng file format by default instead of
pcap [default=yes]
--enable-ipv6 use IPv6 name resolution, if available [default=yes]
--enable-setcap-install install dumpcap with cap_net_admin and cap_net_raw
[default=no]
--enable-setuid-install install dumpcap as setuid [default=no]
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysroot if not specified).
--with-gnutls=[yes/no] use GnuTLS library [default=yes]
--with-gcrypt=[yes/no] use gcrypt library [default=yes]
--with-libgcrypt-prefix=PFX
prefix where LIBGCRYPT is installed (optional)
--with-qt=[yes/no] use Qt instead of GTK+ [default=no]
--with-libnl[=VERSION] use libnl (force version VERSION, if supplied)
[default: yes, if available]
--with-gtk3=[yes/no] use GTK+ 3.0 instead of 2.0 [default=no]
--with-libsmi=[DIR] use libsmi MIB/PIB library [default=yes], optionally
specify the prefix for libsmi
--with-osx-integration use OS X integration functions [default=yes, if
available]
--with-pcap[=DIR] use libpcap for packet capturing [default=yes]
--with-pcap-remote use libpcap remote capturing (requires libpcap)
--with-zlib[=DIR] use zlib (located in directory DIR, if supplied) for
gzip compression and decompression [default=yes, if
available]
--with-lua[=DIR] use liblua (located in directory DIR, if supplied)
for the Lua scripting plugin [default=yes, if
available]
--with-portaudio[=DIR] use libportaudio (located in directory DIR, if
supplied) for the rtp_player [default=yes, if
available]
--with-dumpcap-group=GROUP
restrict dumpcap to GROUP
--with-libcap[=DIR] use libcap (located in directory DIR, if supplied)
for POSIX.1e capabilities management [default=yes,
if present]
--with-ssl[=DIR] use SSL crypto library (located in directory DIR, if
supplied) [default=no]
--with-krb5[=DIR] use Kerberos library (located in directory DIR, if
supplied) to use in Kerberos dissection
[default=yes]
--with-c-ares[=DIR] use c-ares (located in directory DIR, if supplied) -
supersedes --with-adns [default=yes, if present]
--with-adns[=DIR] use GNU ADNS (located in directory DIR, if supplied)
[default=yes, if present]
--with-geoip[=DIR] use GeoIP (located in directory DIR, if supplied)
[default=yes, if present]
--with-plugins[=DIR] support plugins (installed in DIR, if supplied)
[default=yes, if possible]
ここから最低限必要そうなものを選択します。
root@plum:/usr/local/src/wireshark-1.10.8# time ./configure --disable-wireshark --enable-tshark \ > --enable-ipv6 --disable-gtktest --disable-glibtest \ > --disable-editcap --disable-capinfos \ > --disable-mergecap --disable-reordercap \ > --disable-text2pcap --disable-dftest \ > --disable-randpkt --disable-airpcap \ > --disable-dumpcap --disable-rawshark \ > --enable-pcap-ng-default \ > --without-lua --without-ssl
今回は tshark だけ欲しいのでこんな感じにします。 これを実行します。
checking build system type... armv7l-unknown-linux-gnueabihf checking host system type... armv7l-unknown-linux-gnueabihf ... checking for perl... /usr/bin/perl checking for python... no checking for bison... no checking for byacc... no checking for yacc... no configure: error: I couldn't find yacc (or bison or ...); make sure it's installed and in your path
error がでて途中で止まってしまいました。 ざっと読むと yacc がないって言っているようです。 yacc を入れましょう。
yacc もソースコードを取ってきてインストールすればいいのですが ここは簡単に apt-get を使って入れます。
root@plum:/usr/local/src/wireshark-1.10.8# apt-get install -y yacc Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package yacc
yacc なんていうパッケージはないと言われてしまいました。 そこで apt-cache search を使ってどれに含まれているか探してみましょう。
root@plum:/usr/local/src/wireshark-1.10.8# apt-cache search yacc bison - YACC-compatible parser generator byacc-j - Berkeley YACC parser generator extended to generate Java code cup - LALR parser generator for Java(tm) erlang-parsetools - Erlang/OTP parsing tools exuberant-ctags - build tag file indexes of source code definitions gob2 - GTK+ Object Builder jflex - lexical analyzer generator for Java libbison-dev - YACC-compatible parser generator - development library libparse-recdescent-perl - Perl module to create and use recursive-descent parsers libparse-yapp-perl - Perl module for creating fully reentrant LALR parser OO Perl modules python-ply - Lex and Yacc implementation for Python2 python-ply-doc - Lex and Yacc implementation for Python (documentation) python-pyparsing - Python parsing module python-pyparsing-doc - Python parsing module, documentation package python3-ply - Lex and Yacc implementation for Python3 python3-pyparsing - Python parsing module, Python3 package 9base - Plan 9 userland tools btyacc - Backtracking parser generator based on byacc byacc - public domain Berkeley LALR Yacc parser generator cscope - interactively examine a C program source cutils - C source code utilities fp-utils - Free Pascal - utilities dependency package fp-utils-2.6.2 - Free Pascal - utilities global - Source code search and browse tools happy - Parser generator for Haskell jikespg - Jikes Parser Generator kimwitu - Compiler development tool, complementary to lex and yacc kimwitu++ - A (syntax-)tree-handling tool (term processor) kimwitu-doc - documentation for compiler development tool Kimwitu lemon - LALR(1) Parser Generator for C or C++ libghc-highlighting-kate-dev - syntax highlighting library based on Kate syntax descriptions libghc-highlighting-kate-doc - library documentation for highlighting-kate; documentation libghc-highlighting-kate-prof - highlighting-kate library with profiling enabled; profiling libraries menhir - Parser generator for OCaml mono-jay - LALR(1) parser generator oriented to Java/CLI pccts - The Purdue Compiler Construction Tool Set (PCCTS). peg - recursive-descent parser generators for C perl-byacc - Berkeley LALR parser generator, Perl version python-lesscpy - LessCss Compiler for Python 2.x python-parsley - pattern-matching language based on OMeta and Python python3-lesscpy - LessCss Compiler for Python 3.x racc - Ruby LALR parser generator sloccount - programs for counting physical source lines of code (SLOC) styx - combined parser/scanner generator for C/C++
さっきの configure のエラーでも yacc (or bison or … )と書いてあったし 一番最初にある bison をインストールしましょう。
root@plum:/usr/local/src/wireshark-1.10.8# apt-get install -y bison
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libbison-dev libsigsegv2 m4
Suggested packages:
bison-doc
The following NEW packages will be installed:
bison libbison-dev libsigsegv2 m4
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 756 kB of archives.
After this operation, 2004 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libsigsegv2 armhf 2.10-2 [14.0 kB]
Get:2 http://ports.ubuntu.com/ubuntu-ports/ trusty/main m4 armhf 1.4.17-2ubuntu1 [178 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libbison-dev armhf 2:3.0.2.dfsg-2 [337 kB]
Get:4 http://ports.ubuntu.com/ubuntu-ports/ trusty/main bison armhf 2:3.0.2.dfsg-2 [227 kB]
Fetched 756 kB in 4s (178 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "ja_JP.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously unselected package libsigsegv2:armhf.
(Reading database ... 24673 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.10-2_armhf.deb ...
Unpacking libsigsegv2:armhf (2.10-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../m4_1.4.17-2ubuntu1_armhf.deb ...
Unpacking m4 (1.4.17-2ubuntu1) ...
Selecting previously unselected package libbison-dev:armhf.
Preparing to unpack .../libbison-dev_2%3a3.0.2.dfsg-2_armhf.deb ...
Unpacking libbison-dev:armhf (2:3.0.2.dfsg-2) ...
Selecting previously unselected package bison.
Preparing to unpack .../bison_2%3a3.0.2.dfsg-2_armhf.deb ...
Unpacking bison (2:3.0.2.dfsg-2) ...
Setting up postgresql-client-9.3 (9.3.4-1) ...
update-alternatives: using /usr/share/postgresql/9.3/man/man1/psql.1.gz to provide /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode
update-alternatives: error: error creating symbolic link `/usr/share/man/man7/DROP_LANGUAGE.7.gz.dpkg-tmp': No such file or directory
dpkg: error processing package postgresql-client-9.3 (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of postgresql-9.3:
postgresql-9.3 depends on postgresql-client-9.3; however:
Package postgresql-client-9.3 is not configured yet.
dpkg: error processing package postgresql-9.3 (--configure):
dependency problems - leaving unconfigured
Setting up libsigsegv2:armhf (2.10-2) ...
Setting up m4 (1.4.17-2ubuntu1) ...
Setting up libbison-dev:armhf (2:3.0.2.dfsg-2) ...
Setting up bison (2:3.0.2.dfsg-2) ...
update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/yacc.1.gz because associated file /usr/share/man/man1/bison.yacc.1.gz (of link group yacc) doesn't exist
Processing triggers for libc-bin (2.19-0ubuntu6) ...
Errors were encountered while processing:
postgresql-client-9.3
postgresql-9.3
localepurge: Disk space freed in /usr/share/locale: 0 KiB
localepurge: Disk space freed in /usr/share/man: 0 KiB
Total disk space freed by localepurge: 0 KiB
E: Sub-process /usr/bin/dpkg returned an error code (1)
これで bison がインストールできました。 再び configure を実行してみましょう。
checking for perl... /usr/bin/perl checking for python... no checking for bison... bison -y checking for bison... /usr/bin/bison checking for flex... no checking for lex... no checking for flex... no configure: error: I couldn't find flex; make sure it's installed and in your path
無事 bison を入れたのでクリア・・・と思いきや今度は flex がないと言っているようです。 同様に apt-get を使って flex をインストールします。
root@plum:/usr/local/src/wireshark-1.10.8# apt-get install -y flex
インストール完了。 configure を実行。
checking for bison... /usr/bin/bison checking for flex... flex checking lex output file root... lex.yy checking lex library... -lfl ... checking for GNU sed as first sed in PATH... yes checking if profile builds must be generated... no checking for pkg-config... no checking for GLIB - version >= 2.14.0... no *** A new enough version of pkg-config was not found. *** See http://www.freedesktop.org/software/pkgconfig/ configure: error: GLib 2.14.0 or later distribution not found.
flex の部分はクリアしましたが 今度は Glib のバージョンが古いと文句を言われているようです。 tshark に GUI はないのでいらないはずなんですが・・・ ともかくこれも apt-get でインストールします。
root@plum:/usr/local/src/wireshark-1.10.8# apt-get install -y libglib2.0-dev
何度目かの configure 。
checking if profile builds must be generated... no checking for pkg-config... /usr/bin/pkg-config checking for GLIB - version >= 2.14.0... yes (version 2.40.0) checking for uic... no ... checking pcap.h usability... no checking pcap.h presence... no checking for pcap.h... no configure: error: Header file pcap.h not found; if you installed libpcap from source, did you also do "make install-incl", and if you installed a binary package of libpcap, is there also a developer's package of libpcap, and did you also install that package?
Glib はクリアしました。 今度は、libpcap がないと言っています。
root@plum:/usr/local/src/wireshark-1.10.8# apt-get install -y libpcap0.8-dev
もういい加減にパスさせてくれても・・・と思いつつ configure を実行。
checking for broken pcap-config... no
checking pcap.h usability... yes
checking pcap.h presence... yes
checking for pcap.h... yes
checking for pcap_open_dead... yes
checking for pcap_freecode... yes
checking whether pcap_breakloop is present... yes
...
The Wireshark package has been configured with the following options.
Build wireshark : no
Build tshark : yes
Build capinfos : no
Build editcap : no
Build dumpcap : no
Build mergecap : no
Build reordercap : no
Build text2pcap : no
Build randpkt : no
Build dftest : no
Build rawshark : no
Save files as pcap-ng by default : yes
Install dumpcap with capabilities : no
Install dumpcap setuid : no
Use dumpcap group : (none)
Use plugins : yes
Use Lua library : no
Use Python binding : no
Build rtp_player : no
Build profile binaries : no
Use pcap library : yes
Use zlib library : yes
Use kerberos library : no
Use c-ares library : no
Use GNU ADNS library : no
Use SMI MIB library : no
Use GNU crypto library : no
Use SSL crypto library : no
Use IPv6 name resolution : yes
Use gnutls library : no
Use POSIX capabilities library : no
Use GeoIP library : no
Use nl library : no
libpcap をクリアしようやくパスしたようです。 次はこれをコンパイルしましょう。 (事前に gcc などは入れておいてください)
root@plum:/usr/local/src/wireshark-1.10.8# time make
ようやくコンパイル終了。
make[2]: Leaving directory `/usr/local/src/wireshark-1.10.8/doc' make[1]: Leaving directory `/usr/local/src/wireshark-1.10.8' real 146m58.819s user 114m6.972s sys 8m15.467s
コンパイルには結構時間がかかります。
さて動くか確認してみましょう。
root@plum:/usr/local/src/wireshark-1.10.8# ./tshark -v
TShark 1.10.8 (Git Rev Unknown from unknown) と表示されるので最新版が完成しているもよう。 ちょっとパケットが取れるかも確認してみましょう。
root@plum:/usr/local/src/wireshark-1.10.8# ./tshark -i eth0 arp -c 3 Running as user "root" and group "root". This could be dangerous. Capturing on 'eth0' 1 0.000000 00:01:8e:e4:4f:2f -> ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.130.20? Tell 192.168.130.71 1 2 0.945578 d0:67:e5:1a:7b:ac -> ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.130.106? Tell 192.168.130.104 3 0.994780 00:01:8e:e4:4f:2f -> ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.130.20? Tell 192.168.130.71 3
危険だから root で実行するなと怒られてはいるものの無事パケットは取れているもよう。 目的は達成できたので後はこれをインストールして完了です。
mae3xx_tips/setup_tshark/start.txt · 最終更新: 2014/07/25 11:04 by コンサルティンググループ
特に明示されていない限り、本Wikiの内容は次のライセンスに従います： CC Attribution-Share Alike 4.0 International
