差分

この文書の現在のバージョンと選択したバージョンの差分を表示します。

--- mae3xx_tips:recording_server:start [2016/01/12 10:42]
コンサルティンググループ作成
+++ mae3xx_tips:recording_server:start [2016/01/12 16:32] (現在)
コンサルティンググループ
@@ ライン 1: / ライン 1: @@
+====== 画像録画サーバを作る ======
+録画機能のあるカメラを使って画像録画サーバを作ってみましょう。
+==== 準備するもの ====
+今回は、大量の画像を保存できるようにSSDを搭載した「FutureNet MA-E320M」使用します。\\
+カメラは、SAMSUNG製[[https://www.samsung-security.com/SAMSUNG/upload/Product_Specifications/SND-L6083R_Specifications.pdf|SND-L6083R]]を使います。\\
+その他、カメラ用にPoEハブ等やネットワークケーブル等ご準備ください。
+==== MA-E320Mを録画サーバにする ====
+=== MA-E320M に SSD を認識させる ===
+  * SSD のパーティションを確保する
+fdisk を使って SSD にパーティションを作成します。
+<code>
+root@plum:~# fdisk /dev/sda
+Command (m for help): p
+Disk /dev/sda: 512.1 GB, 512110190592 bytes
+heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors
+Units = sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk identifier: 0x5dcda687
+   Device Boot      Start         End      Blocks   Id  System
+Command (m for help): n
+Partition type:
+   p   primary (0 primary, 0 extended, 4 free)
+   e   extended
+Select (default p): p
+Partition number (1-4, default 1): 1
+First sector (2048-1000215215, default 2048):
+Using default value 2048
+Last sector, +sectors or +size{K,M,G} (2048-1000215215, default 1000215215):
+Using default value 1000215215
+Command (m for help): t
+Selected partition 1
+Hex code (type L to list codes): 83
+Changed system type of partition 1 to 83 (Linux)
+Command (m for help): p
+Disk /dev/sda: 512.1 GB, 512110190592 bytes
+heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors
+Units = sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk identifier: 0x5dcda687
+   Device Boot      Start         End      Blocks   Id  System
+/dev/sda1            2048  1000215215   500106584   83  Linux
+Command (m for help): w
+The partition table has been altered!
+Calling ioctl() to re-read partition table.
+WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
+The kernel still uses the old table. The new table will be used at
+the next reboot or after you run partprobe(8) or kpartx(8)
+Syncing disks.
+root@plum:~#
+</code>
+  * SSD をフォーマットする
+mkfs.ext4 を使用し ext4 でフォーマットします。
+<code>
+root@plum:~# fsck.ext4 /dev/sda1
+e2fsck 1.42.9 (4-Feb-2014)
+/dev/sda1: clean, 11/31260672 files, 2012648/125026646 blocks
+</code>
+  * SSD をマウントする
+mount を使用し /mnt/rw にマウントします。
+<code>
+root@plum:~# df
+Filesystem      1K-blocks  Used Available Use% Mounted on
+rootfs             253704   252    253452   1% /
+udev               244332     4    244328   1% /dev
+tmpfs               50744   168     50576   1% /run
+/dev/mtdblock8      61184 61184         0 100% /ro
+overlay-tmpfs      253704 13796    239908   6% /rw.tmpfs
+overlay-persist    253704   252    253452   1% /rw
+/dev/loop0           1792  1792         0 100% /ro/lib/modules
+/dev/loop1          11264 11264         0 100% /ro/usr/lib/jvm
+ubi0:overlay        40292   100     38136   1% /rw.tmpfs/.overlay
+overlay            253704   252    253452   1% /
+overlay.log        253704 13796    239908   6% /var/log
+overlay.kmod       253704   252    253452   1% /lib/modules
+overlay.jvm        253704   252    253452   1% /usr/lib/jvm
+none                    4     0         4   0% /sys/fs/cgroup
+none                 5120     0      5120   0% /run/lock
+none               253704     0    253704   0% /run/shm
+none               102400     0    102400   0% /run/user
+root@plum:~# mount -t ext4 -o defaults /dev/sda1 /mnt/rw
+root@plum:~# df
+Filesystem      1K-blocks  Used Available Use% Mounted on
+rootfs             253704   252    253452   1% /
+udev               244332     4    244328   1% /dev
+tmpfs               50744   168     50576   1% /run
+/dev/mtdblock8      61184 61184         0 100% /ro
+overlay-tmpfs      253704 13868    239836   6% /rw.tmpfs
+overlay-persist    253704   252    253452   1% /rw
+/dev/loop0           1792  1792         0 100% /ro/lib/modules
+/dev/loop1          11264 11264         0 100% /ro/usr/lib/jvm
+ubi0:overlay        40292   108     38124   1% /rw.tmpfs/.overlay
+overlay            253704   252    253452   1% /
+overlay.log        253704 13868    239836   6% /var/log
+overlay.kmod       253704   252    253452   1% /lib/modules
+overlay.jvm        253704   252    253452   1% /usr/lib/jvm
+none                    4     0         4   0% /sys/fs/cgroup
+none                 5120     0      5120   0% /run/lock
+none               253704     0    253704   0% /run/shm
+none               102400     0    102400   0% /run/user
+/dev/sda1       492127584 71592 467034280   1% /mnt/rw
+root@plum:~#
+</code>
+  * 起動時に自動的にマウントするようにする
+/etc/udev/rules.d/10-mae3xx.rules に下記の行を追加し起動時に自動的にマウントするようにします。
+<code>
+# SSD
+SUBSYSTEMS=="block", KERNEL=="sda1",RUN+="/bin/mount /dev/%k /mnt/rw"
+</code>
+=== samba をインストールする ===
+  * パッケージのアップデート・アップグレードを行う
+apt-get update と apt-get upgrade を実行する。
+<code>
+root@plum:~# apt-get update && apt-get upgrade
+Ign http://ports.ubuntu.com trusty InRelease
+Get:1 http://ports.ubuntu.com trusty-updates InRelease [64.4 kB]
+Get:2 http://ppa.launchpad.net trusty InRelease [15.5 kB]
+Get:3 http://ppa.launchpad.net trusty/main armhf Packages [874 B]
+Get:4 http://ports.ubuntu.com trusty-security InRelease [64.4 kB]
+Get:5 http://ppa.launchpad.net trusty/main Translation-en [1314 B]
+Get:6 http://ports.ubuntu.com trusty Release.gpg [933 B]
+Get:7 http://ports.ubuntu.com trusty-updates/main armhf Packages [601 kB]
+Get:8 http://ports.ubuntu.com trusty-updates/restricted armhf Packages [8421 B]
+Get:9 http://ports.ubuntu.com trusty-updates/universe armhf Packages [328 kB]
+Get:10 http://ports.ubuntu.com trusty-updates/main Translation-en [342 kB]
+Get:11 http://ports.ubuntu.com trusty-updates/restricted Translation-en [3699 B]
+Get:12 http://ports.ubuntu.com trusty-updates/universe Translation-en [175 kB]
+Get:13 http://ports.ubuntu.com trusty-security/main armhf Packages [362 kB]
+Get:14 http://ports.ubuntu.com trusty-security/restricted armhf Packages [8421 B]
+Get:15 http://ports.ubuntu.com trusty-security/universe armhf Packages [121 kB]
+Get:16 http://ports.ubuntu.com trusty-security/main Translation-en [220 kB]
+Get:17 http://ports.ubuntu.com trusty-security/restricted Translation-en [3206 B]
+Get:18 http://ports.ubuntu.com trusty-security/universe Translation-en [71.6 kB]
+Get:19 http://ports.ubuntu.com trusty Release [58.5 kB]
+Get:20 http://ports.ubuntu.com trusty/main armhf Packages [1295 kB]
+Get:21 http://ports.ubuntu.com trusty/restricted armhf Packages [14 B]
+Get:22 http://ports.ubuntu.com trusty/universe armhf Packages [5710 kB]
+Get:23 http://ports.ubuntu.com trusty/main Translation-en [762 kB]
+Get:24 http://ports.ubuntu.com trusty/restricted Translation-en [3457 B]
+Get:25 http://ports.ubuntu.com trusty/universe Translation-en [4089 kB]
+Fetched 14.3 MB in 3min 33s (67.0 kB/s)
+Reading package lists... Done
+Reading package lists... Done
+Building dependency tree
+Reading state information... Done
+Calculating upgrade... Done
+The following package was automatically installed and is no longer required:
+  libmodbus5
+Use 'apt-get autoremove' to remove it.
+The following packages have been kept back:
+  ddclient initramfs-tools initramfs-tools-bin nfs-common
+The following packages will be upgraded:
+  coreutils libgnutls-openssl27 libgnutls26 libpng12-0 libxml2 ntp
+  python-apt-common python3-apt unattended-upgrades
+upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
+Need to get 2504 kB of archives.
+After this operation, 8192 B disk space will be freed.
+Do you want to continue? [Y/n] y
+Get:1 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main coreutils armhf 8.21-1ubuntu5.3 [999 kB]
+Get:2 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libgnutls-openssl27 armhf 2.12.23-12ubuntu2.4 [15.0 kB]
+Get:3 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libgnutls26 armhf 2.12.23-12ubuntu2.4 [359 kB]
+Get:4 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libpng12-0 armhf 1.2.50-1ubuntu2.14.04.2 [108 kB]
+Get:5 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libxml2 armhf 2.9.1+dfsg1-3ubuntu4.6 [483 kB]
+Get:6 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main ntp armhf 1:4.2.6.p5+dfsg-3ubuntu2.14.04.6 [372 kB]
+Get:7 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main python-apt-common all 0.9.3.5ubuntu2 [16.6 kB]
+Get:8 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main python3-apt armhf 0.9.3.5ubuntu2 [126 kB]
+Get:9 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main unattended-upgrades all 0.82.1ubuntu2.4 [25.9 kB]
+Fetched 2504 kB in 34s (71.7 kB/s)
+Preconfiguring packages ...
+(Reading database ... 20851 files and directories currently installed.)
+Preparing to unpack .../coreutils_8.21-1ubuntu5.3_armhf.deb ...
+Unpacking coreutils (8.21-1ubuntu5.3) over (8.21-1ubuntu5.1) ...
+Setting up coreutils (8.21-1ubuntu5.3) ...
+(Reading database ... 20851 files and directories currently installed.)
+Preparing to unpack .../libgnutls-openssl27_2.12.23-12ubuntu2.4_armhf.deb ...
+Unpacking libgnutls-openssl27:armhf (2.12.23-12ubuntu2.4) over (2.12.23-12ubuntu2.3) ...
+Preparing to unpack .../libgnutls26_2.12.23-12ubuntu2.4_armhf.deb ...
+Unpacking libgnutls26:armhf (2.12.23-12ubuntu2.4) over (2.12.23-12ubuntu2.3) ...
+Preparing to unpack .../libpng12-0_1.2.50-1ubuntu2.14.04.2_armhf.deb ...
+Unpacking libpng12-0:armhf (1.2.50-1ubuntu2.14.04.2) over (1.2.50-1ubuntu2.14.04.1) ...
+Preparing to unpack .../libxml2_2.9.1+dfsg1-3ubuntu4.6_armhf.deb ...
+Unpacking libxml2:armhf (2.9.1+dfsg1-3ubuntu4.6) over (2.9.1+dfsg1-3ubuntu4.5) ...
+Preparing to unpack .../ntp_1%3a4.2.6.p5+dfsg-3ubuntu2.14.04.6_armhf.deb ...
+ * Stopping NTP server ntpd                                              [ OK ]
+Unpacking ntp (1:4.2.6.p5+dfsg-3ubuntu2.14.04.6) over (1:4.2.6.p5+dfsg-3ubuntu2.14.04.5) ...
+Preparing to unpack .../python-apt-common_0.9.3.5ubuntu2_all.deb ...
+Unpacking python-apt-common (0.9.3.5ubuntu2) over (0.9.3.5ubuntu1) ...
+Preparing to unpack .../python3-apt_0.9.3.5ubuntu2_armhf.deb ...
+Unpacking python3-apt (0.9.3.5ubuntu2) over (0.9.3.5ubuntu1) ...
+Preparing to unpack .../unattended-upgrades_0.82.1ubuntu2.4_all.deb ...
+Unpacking unattended-upgrades (0.82.1ubuntu2.4) over (0.82.1ubuntu2.3) ...
+Processing triggers for ureadahead (0.100.0-16) ...
+Setting up libgnutls26:armhf (2.12.23-12ubuntu2.4) ...
+Setting up libgnutls-openssl27:armhf (2.12.23-12ubuntu2.4) ...
+Setting up libpng12-0:armhf (1.2.50-1ubuntu2.14.04.2) ...
+Setting up libxml2:armhf (2.9.1+dfsg1-3ubuntu4.6) ...
+Setting up ntp (1:4.2.6.p5+dfsg-3ubuntu2.14.04.6) ...
+Setting up python-apt-common (0.9.3.5ubuntu2) ...
+Setting up python3-apt (0.9.3.5ubuntu2) ...
+Setting up unattended-upgrades (0.82.1ubuntu2.4) ...
+Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
+localepurge: Disk space freed in /usr/share/locale: 0 KiB
+localepurge: Disk space freed in /usr/share/man: 0 KiB
+Total disk space freed by localepurge: 0 KiB
+</code>
+  * samba のインストール
+apt-get を使用し samba をインストールする。
+<code>
+root@plum:~# apt-get install -y samba
+Reading package lists... Done
+Building dependency tree
+Reading state information... Done
+The following package was automatically installed and is no longer required:
+  libmodbus5
+Use 'apt-get autoremove' to remove it.
+The following extra packages will be installed:
+  libavahi-client3 libavahi-common-data libavahi-common3 libcups2
+  libfile-copy-recursive-perl libgmp10 libhdb9-heimdal libkdc2-heimdal libldb1
+  libntdb1 libpython2.7 libtalloc2 libtdb1 libtevent0 libwbclient0
+  python-crypto python-dnspython python-ldb python-ntdb python-samba
+  python-talloc python-tdb samba-common samba-common-bin samba-dsdb-modules
+  samba-libs tdb-tools update-inetd
+Suggested packages:
+  cups-common python-crypto-dbg python-crypto-doc bind9 bind9utils ldb-tools
+  smbldap-tools winbind ufw heimdal-clients
+Recommended packages:
+  attr samba-vfs-modules
+The following NEW packages will be installed:
+  libavahi-client3 libavahi-common-data libavahi-common3 libcups2
+  libfile-copy-recursive-perl libgmp10 libhdb9-heimdal libkdc2-heimdal libldb1
+  libntdb1 libpython2.7 libtalloc2 libtdb1 libtevent0 libwbclient0
+  python-crypto python-dnspython python-ldb python-ntdb python-samba
+  python-talloc python-tdb samba samba-common samba-common-bin
+  samba-dsdb-modules samba-libs tdb-tools update-inetd
+upgraded, 29 newly installed, 0 to remove and 4 not upgraded.
+Need to get 7963 kB of archives.
+After this operation, 38.2 MB of additional disk space will be used.
+Get:1 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libavahi-common-data armhf 0.6.31-4ubuntu1 [21.0 kB]
+Get:2 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libavahi-common3 armhf 0.6.31-4ubuntu1 [19.7 kB]
+Get:3 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libavahi-client3 armhf 0.6.31-4ubuntu1 [21.9 kB]
+Get:4 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libcups2 armhf 1.7.2-0ubuntu1.6 [153 kB]
+Get:5 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libgmp10 armhf 2:5.1.3+dfsg-1ubuntu1 [187 kB]
+Get:6 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libhdb9-heimdal armhf 1.6~git20131207+dfsg-1ubuntu1.1 [48.1 kB]
+Get:7 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libtalloc2 armhf 2.1.0-1 [21.6 kB]
+Get:8 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libtdb1 armhf 1.2.12-1 [31.8 kB]
+Get:9 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libtevent0 armhf 0.9.19-1 [22.3 kB]
+Get:10 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libldb1 armhf 1:1.1.16-1 [107 kB]
+Get:11 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libntdb1 armhf 1.0-2ubuntu1 [39.3 kB]
+Get:12 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libpython2.7 armhf 2.7.6-8ubuntu0.2 [901 kB]
+Get:13 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libwbclient0 armhf 2:4.1.6+dfsg-1ubuntu2.14.04.9 [24.8 kB]
+Get:14 http://ports.ubuntu.com/ubuntu-ports/ trusty/main python-ldb armhf 1:1.1.16-1 [27.3 kB]
+Get:15 http://ports.ubuntu.com/ubuntu-ports/ trusty/main python-talloc armhf 2.1.0-1 [7702 B]
+Get:16 http://ports.ubuntu.com/ubuntu-ports/ trusty/main python-dnspython all 1.11.1-1build1 [83.1 kB]
+Get:17 http://ports.ubuntu.com/ubuntu-ports/ trusty/main python-ntdb armhf 1.0-2ubuntu1 [7768 B]
+Get:18 http://ports.ubuntu.com/ubuntu-ports/ trusty/main python-tdb armhf 1.2.12-1 [9812 B]
+Get:19 http://ports.ubuntu.com/ubuntu-ports/ trusty/main python-crypto armhf 2.6.1-4build1 [232 kB]
+Get:20 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main samba-libs armhf 2:4.1.6+dfsg-1ubuntu2.14.04.9 [3557 kB]
+Get:21 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main python-samba armhf 2:4.1.6+dfsg-1ubuntu2.14.04.9 [734 kB]
+Get:22 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main samba-common all 2:4.1.6+dfsg-1ubuntu2.14.04.9 [157 kB]
+Get:23 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main samba-common-bin armhf 2:4.1.6+dfsg-1ubuntu2.14.04.9 [455 kB]
+Get:24 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main samba-dsdb-modules armhf 2:4.1.6+dfsg-1ubuntu2.14.04.9 [196 kB]
+Get:25 http://ports.ubuntu.com/ubuntu-ports/ trusty/main tdb-tools armhf 1.2.12-1 [21.9 kB]
+Get:26 http://ports.ubuntu.com/ubuntu-ports/ trusty/main libfile-copy-recursive-perl all 0.38-1 [20.6 kB]
+Get:27 http://ports.ubuntu.com/ubuntu-ports/ trusty/main update-inetd all 4.43 [19.2 kB]
+Get:28 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main libkdc2-heimdal armhf 1.6~git20131207+dfsg-1ubuntu1.1 [47.1 kB]
+Get:29 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main samba armhf 2:4.1.6+dfsg-1ubuntu2.14.04.9 [790 kB]
+Fetched 7963 kB in 32s (245 kB/s)
+Preconfiguring packages ...
+Selecting previously unselected package libavahi-common-data:armhf.
+(Reading database ... 20832 files and directories currently installed.)
+Preparing to unpack .../libavahi-common-data_0.6.31-4ubuntu1_armhf.deb ...
+Unpacking libavahi-common-data:armhf (0.6.31-4ubuntu1) ...
+Selecting previously unselected package libavahi-common3:armhf.
+Preparing to unpack .../libavahi-common3_0.6.31-4ubuntu1_armhf.deb ...
+Unpacking libavahi-common3:armhf (0.6.31-4ubuntu1) ...
+Selecting previously unselected package libavahi-client3:armhf.
+Preparing to unpack .../libavahi-client3_0.6.31-4ubuntu1_armhf.deb ...
+Unpacking libavahi-client3:armhf (0.6.31-4ubuntu1) ...
+Selecting previously unselected package libcups2:armhf.
+Preparing to unpack .../libcups2_1.7.2-0ubuntu1.6_armhf.deb ...
+Unpacking libcups2:armhf (1.7.2-0ubuntu1.6) ...
+Selecting previously unselected package libgmp10:armhf.
+Preparing to unpack .../libgmp10_2%3a5.1.3+dfsg-1ubuntu1_armhf.deb ...
+Unpacking libgmp10:armhf (2:5.1.3+dfsg-1ubuntu1) ...
+Selecting previously unselected package libhdb9-heimdal:armhf.
+Preparing to unpack .../libhdb9-heimdal_1.6~git20131207+dfsg-1ubuntu1.1_armhf.deb ...
+Unpacking libhdb9-heimdal:armhf (1.6~git20131207+dfsg-1ubuntu1.1) ...
+Selecting previously unselected package libtalloc2:armhf.
+Preparing to unpack .../libtalloc2_2.1.0-1_armhf.deb ...
+Unpacking libtalloc2:armhf (2.1.0-1) ...
+Selecting previously unselected package libtdb1:armhf.
+Preparing to unpack .../libtdb1_1.2.12-1_armhf.deb ...
+Unpacking libtdb1:armhf (1.2.12-1) ...
+Selecting previously unselected package libtevent0:armhf.
+Preparing to unpack .../libtevent0_0.9.19-1_armhf.deb ...
+Unpacking libtevent0:armhf (0.9.19-1) ...
+Selecting previously unselected package libldb1:armhf.
+Preparing to unpack .../libldb1_1%3a1.1.16-1_armhf.deb ...
+Unpacking libldb1:armhf (1:1.1.16-1) ...
+Selecting previously unselected package libntdb1:armhf.
+Preparing to unpack .../libntdb1_1.0-2ubuntu1_armhf.deb ...
+Unpacking libntdb1:armhf (1.0-2ubuntu1) ...
+Selecting previously unselected package libpython2.7:armhf.
+Preparing to unpack .../libpython2.7_2.7.6-8ubuntu0.2_armhf.deb ...
+Unpacking libpython2.7:armhf (2.7.6-8ubuntu0.2) ...
+Selecting previously unselected package libwbclient0:armhf.
+Preparing to unpack .../libwbclient0_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_armhf.deb ...
+Unpacking libwbclient0:armhf (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Selecting previously unselected package python-ldb.
+Preparing to unpack .../python-ldb_1%3a1.1.16-1_armhf.deb ...
+Unpacking python-ldb (1:1.1.16-1) ...
+Selecting previously unselected package python-talloc.
+Preparing to unpack .../python-talloc_2.1.0-1_armhf.deb ...
+Unpacking python-talloc (2.1.0-1) ...
+Selecting previously unselected package python-dnspython.
+Preparing to unpack .../python-dnspython_1.11.1-1build1_all.deb ...
+Unpacking python-dnspython (1.11.1-1build1) ...
+Selecting previously unselected package python-ntdb.
+Preparing to unpack .../python-ntdb_1.0-2ubuntu1_armhf.deb ...
+Unpacking python-ntdb (1.0-2ubuntu1) ...
+Selecting previously unselected package python-tdb.
+Preparing to unpack .../python-tdb_1.2.12-1_armhf.deb ...
+Unpacking python-tdb (1.2.12-1) ...
+Selecting previously unselected package python-crypto.
+Preparing to unpack .../python-crypto_2.6.1-4build1_armhf.deb ...
+Unpacking python-crypto (2.6.1-4build1) ...
+Selecting previously unselected package samba-libs:armhf.
+Preparing to unpack .../samba-libs_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_armhf.deb ...
+Unpacking samba-libs:armhf (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Selecting previously unselected package python-samba.
+Preparing to unpack .../python-samba_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_armhf.deb ...
+Unpacking python-samba (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Selecting previously unselected package samba-common.
+Preparing to unpack .../samba-common_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_all.deb ...
+Unpacking samba-common (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Selecting previously unselected package samba-common-bin.
+Preparing to unpack .../samba-common-bin_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_armhf.deb ...
+Unpacking samba-common-bin (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Selecting previously unselected package samba-dsdb-modules.
+Preparing to unpack .../samba-dsdb-modules_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_armhf.deb ...
+Unpacking samba-dsdb-modules (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Selecting previously unselected package tdb-tools.
+Preparing to unpack .../tdb-tools_1.2.12-1_armhf.deb ...
+Unpacking tdb-tools (1.2.12-1) ...
+Selecting previously unselected package libfile-copy-recursive-perl.
+Preparing to unpack .../libfile-copy-recursive-perl_0.38-1_all.deb ...
+Unpacking libfile-copy-recursive-perl (0.38-1) ...
+Selecting previously unselected package update-inetd.
+Preparing to unpack .../update-inetd_4.43_all.deb ...
+Unpacking update-inetd (4.43) ...
+Selecting previously unselected package libkdc2-heimdal:armhf.
+Preparing to unpack .../libkdc2-heimdal_1.6~git20131207+dfsg-1ubuntu1.1_armhf.deb ...
+Unpacking libkdc2-heimdal:armhf (1.6~git20131207+dfsg-1ubuntu1.1) ...
+Selecting previously unselected package samba.
+Preparing to unpack .../samba_2%3a4.1.6+dfsg-1ubuntu2.14.04.9_armhf.deb ...
+Unpacking samba (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Processing triggers for ureadahead (0.100.0-16) ...
+Setting up libavahi-common-data:armhf (0.6.31-4ubuntu1) ...
+Setting up libavahi-common3:armhf (0.6.31-4ubuntu1) ...
+Setting up libavahi-client3:armhf (0.6.31-4ubuntu1) ...
+Setting up libcups2:armhf (1.7.2-0ubuntu1.6) ...
+Setting up libgmp10:armhf (2:5.1.3+dfsg-1ubuntu1) ...
+Setting up libhdb9-heimdal:armhf (1.6~git20131207+dfsg-1ubuntu1.1) ...
+Setting up libtalloc2:armhf (2.1.0-1) ...
+Setting up libtdb1:armhf (1.2.12-1) ...
+Setting up libtevent0:armhf (0.9.19-1) ...
+Setting up libldb1:armhf (1:1.1.16-1) ...
+Setting up libntdb1:armhf (1.0-2ubuntu1) ...
+Setting up libpython2.7:armhf (2.7.6-8ubuntu0.2) ...
+Setting up libwbclient0:armhf (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Setting up python-ldb (1:1.1.16-1) ...
+Setting up python-talloc (2.1.0-1) ...
+Setting up python-dnspython (1.11.1-1build1) ...
+Setting up python-ntdb (1.0-2ubuntu1) ...
+Setting up python-tdb (1.2.12-1) ...
+Setting up python-crypto (2.6.1-4build1) ...
+Setting up samba-libs:armhf (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Setting up python-samba (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Setting up samba-common (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Creating config file /etc/samba/smb.conf with new version
+Setting up samba-common-bin (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Setting up samba-dsdb-modules (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Setting up tdb-tools (1.2.12-1) ...
+update-alternatives: using /usr/bin/tdbbackup.tdbtools to provide /usr/bin/tdbbackup (tdbbackup) in auto mode
+update-alternatives: warning: skip creation of /usr/share/man/man8/tdbbackup.8.gz because associated file /usr/share/man/man8/tdbbackup.tdbtools.8.gz (of link group tdbbackup) doesn't exist
+Setting up libfile-copy-recursive-perl (0.38-1) ...
+Setting up update-inetd (4.43) ...
+Setting up libkdc2-heimdal:armhf (1.6~git20131207+dfsg-1ubuntu1.1) ...
+Setting up samba (2:4.1.6+dfsg-1ubuntu2.14.04.9) ...
+Adding group `sambashare' (GID 113) ...
+Done.
+smbd start/running, process 4310
+nmbd start/running, process 4349
+samba-ad-dc start/running, process 4391
+Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
+Processing triggers for ureadahead (0.100.0-16) ...
+localepurge: Disk space freed in /usr/share/locale: 0 KiB
+localepurge: Disk space freed in /usr/share/man: 0 KiB
+Total disk space freed by localepurge: 0 KiB
+root@plum:~#
+</code>
+  * 共有ディレクトリの作成
+SSD 上 (/mnt/rw) に共有ディレクトリを作成しておく。
+<code>
+root@plum:~# mkdir /mnt/rw/share
+root@plum:~# chmod 777 /mnt/rw/share
+</code>
+  * smb.conf の設定
+共有サーバとして使えるように/etc/samba/smb.conf を編集する。
+下記内容をsmb.confの[global]の下と末尾に加える。\\
+[global]の下
+<code>
+   security = user
+</code>
+末尾
+<code>
+[Share]
+   path = /mnt/rw/share
+   valid users = user1
+   writable = yes
+   share modes = yes
+   guest ok = yes
+   guest only = yes
+</code>
+  * samba ユーザの追加・有効化
+<code>
+root@plum:~# smbpasswd -a user1
+New SMB password:
+Retype new SMB password:
+Added user user1.
+root@plum:~# smbpasswd -e user1
+Enabled user user1.
+</code>
+  * samba の再起動
+設定ファイルを更新後は samba を再起動する。
+<code>
+root@plum:~# initctl restart smbd
+smbd start/running, process 4506
+</code>
+==== カメラの画像を録画サーバに保存するようにする ====
+=== カメラ(SND-L6083R) の設定をする ===
+  * カメラのアドレスを設定する
+添付されてくるツールを使いアドレスを設定する。\\
+{{:mae3xx_tips:recording_server:snd-l6083r-01.png?600|SND-L6083R-01}}
+  * 録画先を設定する
+カメラの WebUI にアクセスしSetup > event > ストレージ > NAS 接続設定を選択する。\\
+IPアドレスには MA-E320M のアドレスを設定する。\\
+{{:mae3xx_tips:recording_server:snd-l6083r-02.png?600|SND-L6083R-02}}

MA-X/MA-S/MA-E/IP-K Developers' WiKi

ユーザ用ツール

サイト用ツール

差分

ページ用ツール